Schulze Isl 6-636+

The Isl 6-636+ is a full feature two port charger that charge most batteries on the market today. Fully automatic charge profiles makes for easy learning and fast charging. Charge your Ni-Cd, Nimh, Li-Lo, Limn, Lipo lead acid and gel batteries with ease. The main difference between the 6-430 and the 6-636 is the 636 can charge at a higher rate and can charge up to 36 cells instead of 30.

Output (1) Charge & Discharge

	1-30 (36) cells Ni-Cd
	1-30 (36) cells Ni-MH
	1-19 (23) cells Lead-acid, lead-gel
	1-13 (16) cells Li-MnO
	1-11 (13) cells Li-Io
	1-11 (13) cells Li-Po

2. Output (2)

	1-6 cells Nickel-Cadmium = 1.2 ... 7.2 V,
	1-6 cells Nickel-Metallhydrid = 1.2 ... 7.2 V,
	1-4 cells Lead acid = 2...8 V,
	1-3 cells Lithium-Mangan-Oxid = 3.0 ... 9.0 V,
	1-3 cells Lithium-Ion = 3.6 ... 10.8 V,
	1-3 cells Lithium-Polymer = 3.6 ...
	10.8 V (identical to the Li-Ion program).
	To charge the maximum rated cell count on output 2 a 13.8 V supply voltage is necessary!

Modes

	Full Automatic
	manual modes
	automatic mode combination programs
	Lead Acid/ Gel cell

Other Features

	charges from 1 cell upward
	discharges from 2 cells Ni-Cd/Ni-MH / 1 cell others - upwards (down to a residual voltage of about 1,3 V)
	selection of a maximum charge quantity possible (safety - cut - off).
	Remembers the set programs you program and you can recall them.