Schulze Isl 8-636g

The Isl 8-936+ is a full feature three port charger that charge most batteries on the market today. Fully automatic charge profiles makes for easy learning and fast charging. Charge your Ni-Cd, Nimh, Li-Lo, Limn, lead acid and gel batteries with ease. The main differences between the 6-636 and the 8-636g is the 8-636 can charge at a higher rate and has three ports instead of just two.

Output 1 (akku 1) energy-re-transfer stage:
Cell number [@ 1.22V / cell]	15-34
Capacity from [~Ah]	1
Discharge currents [~A]	350 / 10
Discharge performance [~W]	200
@ 23V (~19 cells) [~A]	10
@ 30V (~24 cells) [~A]	6.7
@ 36V (~30 cells) [~A]	5.7

Output 2 (akku 2) Ni-Cd accumulator:
Cell number [@ 1.65V / cell]	4 - 27
Capacity from - to [~Ah]	0,1 - 4
Charge performance (@ 29V) [~W]	115
Charge performance (@ 40V) [~W]	95
Min. charge currents [mA]	100/250
@ 6V (~4 cells) [~A]	1.7
@ 9V (~6 Zellen) ca. A	3.0
10.5 - 25V (~7-15 cells) [~A]	5.0
@ 33V (~20 cells) [~A]	3.3
@ 40V (~24 cells) [~A]	2.4
Safety switching off after timeout	selectable
Safety switching off after max. charge capacity:	selectable

Modes

	Full Automatic
	manual modes
	automatic mode combination programs
	Lead Acid/ Gel cell

Other Features

	charges from 1 cell upward
	discharges from 2 cells Ni-Cd/Ni-MH / 1 cell others - upwards (down to a residual voltage of about 1,3 V)
	selection of a maximum charge quantity possible (safety - cut - off).
	Remembers the set programs you program and you can recall them.