| |
blinki-mc3, microprocessor controlled receiver voltage
monitoring device
blinki-mc3 measures the receiver operating voltage
under load (while the model is in flight), stores the value, and displays it
constantly until the receiver is switched off.
The novelty at blinki-mc3 is, that the display can be matched to the used type
of battery by a pot and, if desired, by 2 solder-jumpers.
Very important for the safety of your helicopter or other aircraft using a
receiver battery.
blinki-mc3 uses a piezo sounder to inform you (in two steps) when the
receiver battery reaches a critical state while the model is flying.
blinki-mc3 can be used as a model-finder, i.e. helps you locate a lost
model.
blinki-mc3 features an integral glitch counter which informs you of the
number of occurrences of interferences (glitches) during the flight. It does it
by counting the glitches (pulse variations) at the receiver output to which you
have connected the unit.
blinki-mc3 features a row of eight LEDs: 5x green, 2x yellow, 1x red.
... and this all for the price of two "standard" blinkis.
Weight: 7.5g
Size: ~32 x 16 x 6mm + 10 x 12 mm piezo-buzzer
for more information: download the operating instruction! (available at the
beginning of october)
|